DOES NOT INCLUDE ELECTRIC START

For high flow and high quality check out the Ace GE-660-HONDA Gas Engine/Pump Combo. With up to 110 gpm and the reliability of Honda you can feel secure you will get the job done efficiently.

Suction 1-1/2" Female Pipe Thread
Discharge 1-1/4" Female Pipe Thread
Impeller attaches directly to 3/4" keyed shaft on 5.5 HP Honda
Stainless steel shaft sleeve with o-ring leak protection
All iron construction

Maximum Gallons Per Minute - 110 GPM

Maximum PSI - 120 PSI

Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.

Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications

Part Breakdown

Reference Number	Part Number	EDP Number	Description	Required
1	BAC-53	41110	Pipe plug, 1/8” NPT	3
1	41120	41120	Pipe plug, 1/8” NPT, stainless steel (optional)	3
2	ACAL-12	30161	Volute, 1 1/2” x 1 1/4”, clockwise rotation	1
2	ACAL-12-EC	30196	Volute, 1 1/2” x 1 1/4”, clockwise rotation, e-coated (optional)	1
3	ACAL-28-660-P	30556	Impeller, thermoplastic, 3/4” keyed shaft	1
3	ACAL-28-660	30171	Impeller, cast iron, 3/4” keyed shaft (optional)	1
3	ACAL-28-660-EC	30195	Impeller, cast iron, 3/4” keyed shaft, e-coated (optional)	1
4	41081	41081	Key, impeller, 3/16” x 3/16” x 3/4”	1
5 (1)	BAC-7-660V	30225	Seal, Type 6A-3/4, carbon/ceramic/Viton	1
5 (2)	BAC-7SC-660V	30226	Seal, Type 6A-3/4, silicon carbide/Viton	1
6(1)(2)	BAC-4-150	40015	O-ring, volute seal	1
7	ACAL-66	30186	Bracket, GE-660 keyed shaft	1
7	ACAL-66-EC	30197	Bracket, GE-660 keyed shaft, e-coated (optional)	1
8	40950	40950	Cap screw, 3/8” NC x 3/4” hex head	8
8	40930	40930	Cap screw, 3/8”NC x 3/4”, stainless steel (optional)	1
9	GE-54-660	42222	Slinger	1
10	GE-60-SS	42235	Cap screw, 5/16” NF x 3/4”, stainless steel	5
10	42236	42236	Cap screw, 5/16” NF x 1”, stainless steel (Subaru engines)	1
11 (1)(2)	30031	30031	Washer, Stat-O-Seal, 5/16” ID, impeller attachment	1
12 (1)(2)	30028	30028	Washer, sealing, 5/16” ID, bracket attachment	4
#	42062	42062	Engine, 5.5 HP Honda, pull start, (GX160UT1QX2)	1
#	42064	42064	Engine, 5.5 HP Honda, electric start, (GX160K1QXE2)	1
# (1)(2)	30035	30035	Threadlocker, removable	1
# (1)(2)	30039	30039	Sealant, 3.3 gram foil pack	-
(1)	RK-GE-660	61162	Repair kit	-
(2)	RK-GESC-660	61167	Repair kit with silicon carbide shaft seal	-