205 Series High Flow
Instruction Manual
Part Breakdown
| Reference Number | Part Number | EDP Number | Description | Required |
| 1 | BAC-53 | 41110 | Pipe plug | 4 |
| 1 | 41120 | 41120 | Pipe plug, stainless steel (-FS model) | 4 |
| 2 | 7AC-14-FLG | 41530 | Volute, 300 standard flange x 220 full port flange, cast iron | 1 |
| 2 | 7AC-14-FLG-SS | 41532 | Volute, 300 flange x 220 flange, 316 stainless steel (-FS model) | 1 |
| 3 | BAC-23-B-SS | 40393 | Nut, 3/8” NF, stainless steel | 1 |
| 4 | BAC-24-B-SS | 42702 | Washer, 3/8”, stainless steel, self-locking | 1 |
| 5 | BAC-26-200-P | 40434 | Impeller, thermoplastic | 1 |
| 5 | BAC-26-200-CI | 40433 | Impeller, cast iron (optional) | 1 |
| 5 | BAC-26-200-SS | 40436 | Impeller, 316 stainless steel (-FS model) (optional) | 1 |
| 6 (1) | BAC-4A | 40005 | O-ring, body seal | 1 |
| 7 (1) | BAC-7SC-205V | 40149 | Seal, silicon carbide | 1 |
| 8 | BAC-14-205-HYD | 40338 | Mounting frame for 205 pump | 1 |
| 8 | BAC-14-205-HYD-SS | 40346 | Mounting frame for 205 pump, 316 stainless steel (-FS model) | 1 |
| 9 | 40950 | 40950 | Cap screw, 3/8” NC x 3/4” hex head | 4 |
| 9 | 40930 | 40930 | Cap screw, 3/8” NC x 3/4” hex head, stainless steel (-FS model) | 4 |
| 10 | 41330 | 41330 | Cap screw, 5/16” NC x 3/4” hex head, motor to pump | 4 |
| 11 | BAC-54 | 41130 | Slinger | 1 |
| 12 | BACH-33 | 40820 | Snap ring, internal, BAC-14-205 mounting frame | 2 |
| 13 | BACH-32-HD | 40385 | Snap ring, external, BAC-6-205 shaft | 3 |
| 14 | 40880 | 40880 | Ball bearing, sealed, BAC-6-205 shaft | 2 |
| 15 | BAC-6-205-HYD-SS | 40068 | Shaft, extended keyway, tang, stainless steel | 1 |
| 16 | BAC-25 | 40425 | Key, 1/8” x 1/8” x 13/16”, extended keyway | 1 |
| 17 | S305 | 40163 | Seal support spacer for 205 series pump | 1 |
| 18 | BAC-75-HYD-304N | 41343 | Hydraulic motor, 11 GPM, effective 5/13 | 1 |
| 19 | 41875 | 41875 | O-ring, #8 SAE fitting | 1 |
| 20 | 41445 | 41445 | O-ring, #10 SAE fitting | 1 |
| 21 | BAC-80-8SAE | 41455 | Body, restrictor orifice, #8SAE x 1/2” NPT | 1 |
| 22 | 41448 | 41448 | O-ring, orifice insert | 1 |
| 23 | BAC-79-8 | 41447 | Orifice insert, restrictor insert, 0.125 | 1 |
| 24 | 41442 | 41442 | Reverse check assembly, #10 SAE x 1/2” NPT | 1 |
| 25 | LS-304N | 41429 | Flow limiter (optional) | 1 |
| (1) | RK-FMCSC-205 | 52705 | Repair kit for FMC-205 pump with silicon carbide shaft seal | - |
| # | RK-BAC-75-HYD-300-L | 41362 | Repair kit for 300 Series hydraulic motor | - |
Technical Specifications
- Part #:
- FMCSC-205FS-HYD-304
- Manufacturer:
- Ace Pumps
- Material:
- 316 Stainless Steel
- Ace Pumps EDP #:
- 50037
- Pump Inlet Flange:
- 300
- Pump Outlet Flange:
- 220
- Gasket Material:
- Silicon Carbide
- Hydraulic Flow Rate:
- 13
- Maximum Flow Rate (GPM):
- 240
- Maximum Pressure (PSI):
- 120
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 304
- Material:
- 316 Stainless Steel
- Ace Pumps EDP #:
- 50037
- Pump Inlet Flange:
- 300
- Pump Outlet Flange:
- 220
- Gasket Material:
- Silicon Carbide
- Hydraulic Flow Rate:
- 13
- Maximum Flow Rate (GPM):
- 240
- Maximum Pressure (PSI):
- 120
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 304
- a_mpn:
- FMCSC-205FS-HYD-304
