155 Series High Performance
Instruction Manual
Part Breakdown
| Reference Number | Part Number | EDP Number | Description | Required |
| 1 | 41120 | 41120 | Pipe plug, stainless steel | 4 |
| 2 | BAC-12-150-SS | 40249 | Volute, 316 stainless steel , NPT & flanged | 1 |
| 3 | BAC-23-B-SS | 40393 | Nut, 3/8” NF, stainless steel | 1 |
| 4 | BAC-24-B-SS | 42702 | Washer, 3/8”, stainless steel, vibration proof | 1 |
| 5 | BAC-26-150-P | 40446 | Impeller, Valox, keyway | 1 |
| 5 | BAC-26-150-CI | 40445 | Impeller, cast iron, keyway (optional) | 1 |
| 5 | BAC-26-150-PI | 40448 | Impeller, polypropylene, keyway (optional) | 1 |
| 5 | BAC-26-150-SS | 40449 | Impeller, 316 stainless steel, keyway (optional) | |
| 6 (1) | BAC-4-150 | 40015 | O-ring, body seal | 1 |
| 7 (1) | BAC-7SC-205V | 40149 | Seal, silicon carbide/Viton | 1 |
| 8 | BAC-14-155-HYD-SS | 40348 | Mounting frame, 316 stainless steel | 1 |
| 9 | 40930 | 40930 | Cap screw, 3/8” NC x 3/4” hex head, stainless steel | 4 |
| 10 | BAC-54 | 41130 | Slinger | 1 |
| 11 | BACH-32-HD | 40385 | Snap ring, external, shaft | 3 |
| 12 | BACH-33 | 40820 | Snap ring, internal, mounting frame | 2 |
| 13 | 40880 | 40880 | Ball bearing, sealed | 2 |
| 14 | BACH-25 | 40420 | Key, 1/8” x 1/8” x 1/2” | 1 |
| 15 | BAC-6-155-HYD-SS | 40072 | Shaft, 5/8” diameter, keyway and tang slot, stainless steel | 1 |
| 16 | S255 | 40177 | Seal support spacer for 200 Series HYD motor | 1 |
| 17 | BAC-75-HYD-206N5 | 41329 | Hydraulic motor, 7 GPM (motor only - no external fittings) | 1 |
| 18 | 41255 | 41255 | Cap screw, 5/16” N. C. x 3-3/4” socket head (for 206N motor) | 4 |
| 19 | 41875 | 41875 | O-ring, #8 SAE fitting | 2 |
| 20 | BAC-78-8SAE | 41441 | Reverse check valve, #8 SAE male x 1/2” NPT female | 1 |
| 21 | BAC-80-8SAE | 41455 | Adapter, restrictor body, #8 SAE male x 1/2” NPT female | 1 |
| 22 | 41448 | 41448 | O-ring, orifice insert | 1 |
| 23 | BAC-79-7 | 41456 | Orifice, restrictor insert, .109 (206N) | 1 |
| 24 | LS-206N | 41418 | Flow limiting valve (206N), #8 SAE male x 1/2” NPT female (optional) | - |
| -1 | RK-FMCSC-155 | 52713 | Repair kit for FMC-155 series with silicon carbide shaft seal | - |
| # | RK-BAC-75-HYD-L | 41374 | Repair kit for 200 Series motor | - |
Technical Specifications
- Part #:
- FMCSC-155FS-HYD-206
- Manufacturer:
- Ace Pumps
- Material:
- 316 Stainless Steel
- Ace Pumps EDP #:
- 50056
- Pump Inlet Flange:
- 220
- Pump Outlet Flange:
- 200
- Gasket Material:
- Silicon Carbide
- Hydraulic Flow Rate:
- 7
- Inlet:
- 1-1/2" NPT
- Maximum Flow Rate (GPM):
- 240
- Maximum Pressure (PSI):
- 120
- Outlet:
- 1-1/4" NPT
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 206
- Material:
- 316 Stainless Steel
- Ace Pumps EDP #:
- 50056
- Pump Inlet Flange:
- 220
- Pump Outlet Flange:
- 200
- Gasket Material:
- Silicon Carbide
- Hydraulic Flow Rate:
- 7
- Inlet:
- 1-1/2" NPT
- Maximum Flow Rate (GPM):
- 240
- Maximum Pressure (PSI):
- 120
- Outlet:
- 1-1/4" NPT
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 206
- a_mpn:
- FMCSC-155FS-HYD-206
