200 Series High Flow
Instruction Manual
Part Breakdown
| Reference Number | Part Number | EDP Number | Description | Required |
| 1 | 41120 | 41120 | Pipe plug, stainless steel | 4 |
| 2 | 7AC-14-CCW-SS | 41531 | Volute, 2” x 1-1/2”, stainless steel | 1 |
| 3 | BAC-23-B-SS | 40393 | Nut, 3/8” NF, stainless steel | 1 |
| 4 | BAC-24-B-SS | 42702 | Washer, 3/8”, stainless steel, self-locking | 1 |
| 5 | BAC-26-200-SS | 40436 | Impeller,with extended keyway, stainless steel | 1 |
| 5 | BAC-26-200-P | 40434 | Impeller,with extended keyway, thermoplastic (optional) | 1 |
| 6 (1)(2) | BAC-4A | 40005 | O-ring, body seal | 1 |
| 7 (1) | BAC-7V | 40151 | Seal, mechanical, Viton (includes 40160 O-ring) | 1 |
| 7 (2) | BAC-7SC | 40152 | Seal, mechanical, silicon carbide (includes 40160 O-ring) (optional) | 1 |
| 7A (1)(2) | 40160 | 40160 | O-ring, shaft seal | 1 |
| 8 | BAC-14-LIN | 40336 | Liner; mounting frame, stainless steel | 1 |
| 9 | BAC-14-HYD-300A-LIN | 40337 | Mounting frame, -300 (A & N) series hydraulic motor (machined for liner) | 1 |
| 10 | 40930 | 40930 | Cap screw, 3/8” NC x 3/4” hex head, stainless steel | 4 |
| 11 | 41330 | 41330 | Cap screw, 5/16” N. C. x 3/4” hex head, motor to pump | 4 |
| 12 | BAC-54 | 41130 | Slinger | 1 |
| 13 | BAC-33 | 40810 | Snap ring, internal, BAC-14 mounting frame | 2 |
| 14 | BAC-37 | 40870 | Ball bearing, sealed, BAC-6 shaft | 2 |
| 15 | BAC-32 | 40790 | Snap ring, external, BAC-6 shaft | 2 |
| 16 | BAC-32-S | 40795 | Spacer for BAC-6 shaft | 1 |
| 17 | BAC-25 | 40425 | Key, 1/8” x 1/8” x 13/16”, extended keyway | 1 |
| 18 | BAC-6-HYD-200-SS | 40063 | Shaft, extended keyway, tang, stainless steel | 1 |
| 19 | BAC-75-HYD-304 | 41381 | Hydraulic motor, 11 GPM (includes parts 11, 20 thru 27) | 1 |
| 20 | S300 | 40162 | Seal support spacer for 300 Series HYD motor | 1 |
| 21 | BAC-75-HYD-304N | 41343 | Hydraulic motor, 11 GPM, effective 5/13 (motor only - no external fittings) | 1 |
| 21 | BAC-75-HYD-304A-12SAE | 41426 | Hydraulic motor, 11 GPM, #12 SAE end ports (optional) | 1 |
| 22 | 41875 | 41875 | O-ring, #8 SAE fitting | 1 |
| 23 | 41445 | 41445 | O-ring, #10 SAE fitting | 1 |
| 24 | BAC-80-8SAE | 41455 | Body, restrictor orifice, #8SAE x 1/2” NPT | 1 |
| 25 | 41448 | 41448 | O-ring, orifice insert | 1 |
| 26 | BAC-79-8 | 41447 | Orifice insert, restrictor insert, 0.125 | 1 |
| 27 | BAC-78-10SAE | 41442 | Reverse check assembly, #10 SAE x 1/2” NPT | 1 |
| 28 | LS-304N | 41429 | Flow limiter, #8 SAE X 1/2” NPT (optional) | 1 |
| (1) | RK-FMC | 52700 | Repair kit for FMC series pump | - |
| (2) | RK-FMCSC | 52706 | Repair kit for FMC series pump with silicon carbide shaft seal | - |
| # | RK-BAC-75-HYD-300-L | 41362 | Repair kit for 300 Series -L motor | - |
Technical Specifications
- Part #:
- FMC-200SS-HYD-304
- Manufacturer:
- Ace Pumps
- Material:
- 316 Stainless Steel
- Ace Pumps EDP #:
- 50060
- Gasket Material:
- Viton
- Hydraulic Flow Rate:
- 11
- Inlet:
- 2" NPT
- Maximum Flow Rate (GPM):
- 200
- Maximum Pressure (PSI):
- 120
- Outlet:
- 1-1/2" NPT
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 304
- Material:
- 316 Stainless Steel
- Ace Pumps EDP #:
- 50060
- Gasket Material:
- Viton
- Hydraulic Flow Rate:
- 11
- Inlet:
- 2" NPT
- Maximum Flow Rate (GPM):
- 200
- Maximum Pressure (PSI):
- 120
- Outlet:
- 1-1/2" NPT
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 304
- a_mpn:
- FMC-200SS-HYD-304
