PTO Output: 1" ( 25.4 mm) Solid Shaft
Instruction Manual
Part Breakdown
| Reference Number | Part Number | Description | Required |
| 1 | 1410-0082 | Spacer | 1 |
| 2 | 2120-0011 | Mechanical Seal | 1 |
| 3 | 1721-0083 | O-Ring | 1 |
| 4 | 2406-0020 | Plug | 4 |
| 5 | 2270-0057 | Washer | 1 |
| 6 | 2250-0051 | Jam Nut | 1 |
| 7 | 2250-0052 | Impeller Nut | 1 |
| 8 | 0700-9000P | Pump Casing | 1 |
| 9 | 1610-0042 | Woodruff Key **(1) required for Model 9006P, (2) for Model 9008P | ** |
| 10 | 0403-9000P | Impeller (Polyprolylene) | 1 |
| 11 | 2210-0087 | Capscrew | 6 |
| 12 | 2270-0041 | Washer | 6 |
| 13 | 0750-9000P | Back Cover | 1 |
| 14 | 0750-9006C | Flange | 1 |
| 15 | 2220-0013 | Capscrew | 4 |
| 16 | 0752-9006C | Flange | 1 |
| 17 | 0503-9000 | Shaft (Model 9006P) | 1 |
| 18 | 0504-9000 | Shaft (Model 9008P) | 1 |
| 19 | 2130-0018 | Bearing Lip Seal | 1 |
| 20 | 1810-0013 | Retaining Ring *(1) Required for 9006P, (2) for 9008P | * |
| 21 | 2008-0001 | Ball Bearing | 1 |
| 22 | 1820-0025 | Retaining Ring | 1 |
| 23 | 2210-0046 | Capscrew | 3 |
| 24 | 2270-0003 | Washer | 3 |
| 25 | 2265-0003 | Thrustwasher | 6 |
| 26 | 2007-0022 | Bearing Inner Race | 3 |
| 27 | 3900-0039 | Driver Gear (Model 9006P) w/ bearing 540 | 3 |
| 27A | 3900-0040 | Driver Gear (Model 9008P w/ bearing 1000 | 3 |
| 28 | 3900-0013 | Sun Gear (Model 9008P) | 1 |
| 29 | 1810-0011 | Retaining Ring (Model 9008P) | 1 |
| 30 | 0562-9000D | Driver Hub (9006P) 1-3/8" PTO 540 rpm | 1 |
| 30A | 0562-9002D | Driver Hub (9008P) 1-3/8" PTO 1000 rpm | 1 |
| 30B | 0501-9016D | Shaft (solid) 540 rpm | 1 |
| 30C | 0501-9018D | Shaft (solid) 1000 rpm | 1 |
| 31 | 1800-0014 | Retaining Ring | 1 |
| 32 | 2005-0002 | Ball Bearing | 1 |
| 33 | 2102-0025 | Oil Seal | 1 |
| 34 | 1810-0001 | Retaining Ring | 1 |
| 35 | 3900-0009 | Ring Gear | 1 |
| 36 | 1450-0004 | Cushion Bumper | 8 |
| 37 | 1700-0101 | Gasket | 1 |
| 38 | 0754-9000C | Gear Casing | 1 |
| 39 | 2210-0088 | Hex Head Screw | 1 |
| 40 | 2210-0026 | Capscrew | 4 |
| 41 | 2404-0193 | Breather Vent | 1 |
| 43 | 2406-0019 | Oil Plug | 4 |
| 44 | 1720-0139 | O-Ring | 1 |
| 45 | 1700-0098 | Gasket | 1 |
| 47 | 1700-0097 | Gasket | 1 |
| 48 | 1410-0083 | Slinger Ring | 1 |
| 49 | 3435-0058 | Locking Collar Kit (hollow shaft only) | 1 |
- Part #:
- 9018P-O
- Manufacturer:
- Hypro
- Material:
- Cast Iron
- Gasket Material:
- Viton
- Inlet:
- 1-1/2" NPT
- Maximum Flow Rate (GPM):
- 94
- Maximum Pressure (PSI):
- 67
- Maximum RPM:
- 1000
- Maximum Temperature (F°):
- 140
- Outlet:
- 1-1/4" NPT
- Pump Series:
- 9000P-O
- Material:
- Cast Iron
- Gasket Material:
- Viton
- Inlet:
- 1-1/2" NPT
- Maximum Flow Rate (GPM):
- 94
- Maximum Pressure (PSI):
- 67
- Maximum RPM:
- 1000
- Maximum Temperature (F°):
- 140
- Outlet:
- 1-1/4" NPT
- Pump Series:
- 9000P-O
- a_mpn:
- 9018P-O
