| Reference Number |
Part Number |
EDP Number |
Description |
Required |
| 1 | BAC-53 | 41110 | Pipe plug, 1/8” NPT, hex head | 3 |
| 1 | 41120 | 41120 | Pipe plug, 1/8” NPT, hex head, stainless steel (optional) | 3 |
| 2 | BAC-12-650-FLG | 30159 | Volute, NPT & 220 flange x NPT & 200 flange (F model) | 1 |
| 2 | BAC-12-650-FLG-SS | 30156 | Volute, NPT & 220 x NPT & 200, 316 stainless steel (FS model) | 1 |
| 3 | 40930 | 40930 | Cap screw, 3/8” NC x 3/4” hex head, stainless steel | 1 |
| 4 (1)(2) | 30029 | 30029 | Washer, 3/8” O.D., sealing, stainless steel | 1 |
| 5 | BAC-26-650 | 30169 | Impeller, cast iron, e-coated | 1 |
| 5 | BAC-26-650-SS | 30191 | Impeller, stainless steel (optional) | 1 |
| 6 (1) | BAC-7-650 | 40145 | Seal, carbon/ceramic/Viton®, 3/4” | 1 |
| 6 (2) | BAC-7SC-650 | 40146 | Seal, silicon carbide/Viton®, 3/4” (optional) | 1 |
| 6 | BAC-7-650B | 40144 | Seal, carbon/ceramic/Buna N, 3/4” (for aqua ammonia) | 1 |
| 7 (1)(2) | BAC-4-150 | 40015 | O-ring, volute seal | 1 |
| 8 | BAC-14-650-HYD | 40325 | Mounting frame, cast iron, e-coated | 1 |
| 8 | BAC-14-650-HYD-LIN | 40343 | Mounting frame, cast iron, e-coated, for liner (FS model) | 1 |
| 8 (1) | BAC-16-650-LIN | 40344 | Liner, 316 stainless steel (FS model) | 1 |
| 9 | 40950 | 40950 | Cap screw, 3/8” NC x 3/4” hex head | 8 |
| 9 | 40930 | 40930 | Cap screw, 3/8” NC x 3/4” hex head, stainless steel (optional) | 8 |
| 10 | BAC-54-650 | 41132 | Slinger, 1.5” OD x 7/8” ID | 1 |
| 11 | 41943 | 41943 | Snap ring, internal, mounting frame | 2 |
| 12 | 40875 | 40875 | Bearing, FMC-650 models | 2 |
| 13 | BAC-6-650-HYD-SS | 40051 | Shaft, 1.13” dia., 11T female spline, stainless steel | 1 |
| 14 | 41085 | 41085 | Key, .188 x .188 x .875, FMC-650 models | 1 |
| 15 | 43419 | 43419 | O-ring, flange, M Series (effective 6/15) | 1 |
| 16 | 43414 | 43414 | Pad, absorbent, M Series (effective 6/15) | 1 |
| 17 | BAC-75-HYD-M16 | 41359 | Motor, hydraulic, pressure plated gear, 14.5 gpm | 1 |
| 17 | BAC-75-HYD-M16-CD | 41358 | Motor, pressure plated gear, 14.5 gpm, case drain (optional) | 1 |
| 18 | 42701 | 42701 | Washer, 3/8” | 2 |
| 19 | 41907 | 41907 | Cap screw, 3/8” NC x 1”, socket head | 2 |
| 20 | 41445 | 41445 | O-ring, #10 SAE fitting | 2 |
| 21 | 41442 | 41442 | Reverse check, #10 SAE male x 1/2” NPT female | 1 |
| 22 | 41446 | 41446 | Body, adapter/restrictor, #10 SAE male x 1/2” NPT female | 1 |
| 23 | 41448 | 41448 | O-ring, restrictor insert | 1 |
| 24 | 41447 | 41447 | Restrictor orifice insert, .125 | 1 |
| (1) | RK-FMC-650 | 52720 | Repair kit, carbon/ceramic/Viton seal, FMC-650 models | - |
| (2) | RK-FMCSC-650 | 52721 | Repair kit, silicon carbide/Viton seal, FMC-650 models | - |
