| Reference Number |
Part Number |
EDP Number |
Description |
Required |
| 1 | BAC-53 | 41110 | Pipe plug,1/8" NPT | 3 |
| 1 | 41120 | 41120 | Pipe plug,1/8" NPT, stainless steel (optional) | 3 |
| 2 | BAC-12-CW | 40253 | Volute, 1-1/4" x 1", cast iron | 1 |
| 3 | BAC-26-CW-150-P | 41510 | Impeller, Valox, right hand fine thread | 1 |
| 3 | BAC-26-CW-150-CI | 41515 | Impeller, cast iron, right hand fine thread (optional) | 1 |
| *4 | BAC-4A | 40005 | "O" Ring for BAC-12 volute seal | 1 |
| *5 | BAC-7V | 40151 | Seal, Viton mechanical seal (includes 40160 "O" ring) | 1 |
| 5 | BAC-7SC | 40152 | Seal, Silicon carbide mechanical seal (includes 40160 "O" Ring)(optional) | 1 |
| 5A | 40160 | 40160 | "O" Ring for BAC-6 shaft | 1 |
| 6 | BAC-14-MIA | 40290 | Mounting frame, machined for idler arm | 1 |
| 7 | 40930 | 40930 | Cap screw, 3/8" NC x 3/4" Hex head, stainless steel (optional) | 4 |
| 7 | 40950 | 40950 | Cap screw, 3/8" NC x 3/4" Hex head | 4 |
| 8 | BAC-54 | 41130 | Slinger | 1 |
| 9 | BAC-33 | 40810 | Snap ring, internal, BAC-14 mounting frame | 2 |
| 10 | BAC-37 | 40870 | Bearing, BAC-6 driven shaft | 2 |
| 11 | BAC-32 | 40790 | Snap ring, external, BAC-6 driven shaft | 2 |
| 12 | BAC-32-S | 40795 | Spacer for BAC-6 shaft | 1 |
| 13 | BAC-6-CW-D-SS | 41500 | Shaft, 5/8" driven, -D clutch, right hand NF thread, stainless steel | 1 |
| 14 | BAC-50 | 41080 | Key, 3/16" x 3/16" x 1-1/4" | 1 |
| 15 | 41492 | 41492 | Spacer, -D clutch | 1 |
| 16 | 41491 | 41491 | Adapter plate, -D clutch | 1 |
| 17 | BAC-36 | 40850 | Snap ring, external, BAC-13 idler arm | 1 |
| 18 | 41496 | 41496 | Coil ring with 4 cap screws, - D clutch, 12 volt, DC activated | 1 |
| 19 | 41497 | 41497 | 5" Pulley assy., -D clutch | 1 |
| 20 | 41494 | 41494 | Washer, -D clutch attachment | 1 |
| 21 | GE-60 | 42230 | Cap Screw, 5/16" NF x 3/4", -D clutch attachment | 1 |
| # | RK-FMC | 52700 | Repair kit for FMC series | - |
| # | 41493 | 41493 | Magnetic Clutch assembly, includes 41492, 41496, and 41497 | - |
