150 Series High Performance
Instruction Manual
Part Breakdown
| Reference Number | Part Number | EDP Number | Description | Required |
| 1 | BAC-53 | 41110 | Pipe plug | 4 |
| 1 | 41120 | 41120 | Pipe plug, stainless steel (optional) | 4 |
| 2 | BAC-12-150 | 40255 | Volute, 1-1/2” x 1-1/4” | 1 |
| 3 | BAC-23-A | 40391 | Nut, 3/8” NF, cad plated | 1 |
| 3 | BAC-23-B-SS | 40393 | Nut, 3/8” NF, stainless steel (standard on -SS models) | 1 |
| 4 (1)(2) | BAC-24-HYD-SS | 40400 | Washer, 3/8” star, stainless steel | 1 |
| 4 | BAC-24-B-SS | 42702 | Washer, 3/8”, stainless steel, vibration proof (standard on -SS models) | 1 |
| 5 | BAC-26-150-P | 40446 | Impeller,Valox, keyway | 1 |
| 5 | BAC-26-150-CI | 40445 | Impeller, cast iron, keyway (optional) | 1 |
| 5 | BAC-26-150-PI | 40448 | Impeller, polypropylene, keyway (optional) | 1 |
| 6 (1) | BAC-7V | 40151 | Seal, carbon/ceramic/Viton (includes 40160 O-ring) | 1 |
| 6 (2) | BAC-7SC | 40152 | Seal, silicon carbide/Viton (includes 40160 O-ring) (optional) | 1 |
| 6A (1)(2) | 40160 | 40160 | O-ring, shaft seal | 1 |
| 7 (1)(2) | BAC-4-150 | 40015 | O-ring, body seal | 1 |
| 8 | BAC-14-150-HYD | 40305 | Mounting frame (for 200 Series hydraulic motor) | 1 |
| 9 | 40950 | 40950 | Cap screw, 3/8” NC x 3/4” hex head | 4 |
| 9 | 40930 | 40930 | Cap screw, 3/8” NC x 3/4” hex head, stainless steel (optional) | 4 |
| 10 | BAC-54 | 41130 | Slinger | 1 |
| 11 | BAC-33 | 40810 | Snap ring, internal, BAC-14 mounting frame | 2 |
| 12 | BAC-37 | 40870 | Ball Bearing, sealed, BAC-6 shaft | 2 |
| 13 | BAC-32 | 40790 | Snap ring, external, BAC-6 shaft | 2 |
| 14 | BAC-32-S | 40795 | Spacer for BAC-6 shaft | 1 |
| 15 | BACH-25 | 40420 | Key, 1/8” x 1/8” x 1/2” | 1 |
| 16 | BAC-6-HYD-SS | 40061 | Shaft, 5/8” diameter, keyway and tang slot, stainless steel | 1 |
| 17 | BAC-75-HYD-206 | 41372 | Hydraulic motor, 7 GPM (includes parts 18 - 25) | 1 |
| 18 | S200 | 40161 | Seal support spacer for 200 Series HYD motor | 1 |
| 19 | BAC-75-HYD-206N | 41397 | Hydraulic motor, 7 GPM (motor only - no external fittings) | 1 |
| 20 | 41255 | 41255 | Cap screw, 5/16” N. C. x 3-3/4” socket head (for 206N motor) | 4 |
| 21 | 41875 | 41875 | O-ring, #8 SAE fitting | 2 |
| 22 | BAC-78-8SAE | 41441 | Reverse check valve, #8 SAE male x 1/2” NPT female | 1 |
| 23 | BAC-80-8SAE | 41455 | Adapter, restrictor body, #8 SAE male x 1/2” NPT female | 1 |
| 24 | 41448 | 41448 | O-ring, orifice insert | 1 |
| 25 | BAC-79-7 | 41456 | Orifice, restrictor insert, .109 (206N) | 1 |
| 26 | LS-206N | 41418 | Flow limiting valve (206N), #8 SAE male x 1/2” NPT female | 1 |
| (1) | RK-FMC-150 | 52710 | Repair kit for FMC-150 series pump | - |
| (2) | RK-FMCSC-150 | 52711 | Repair kit for FMC-150 series with silicon carbide shaft seal | - |
| # | RK-BAC-75-HYD-L | 41374 | Repair kit for 200-L Series motor | - |
Technical Specifications
- Part #:
- FMC-150-HYD-206
- Manufacturer:
- Ace Pumps
- Material:
- Cast Iron
- Ace Pumps EDP #:
- 49920
- Gasket Material:
- Viton
- Hydraulic Flow Rate:
- 7
- Inlet:
- 1-1/2" NPT
- Maximum Flow Rate (GPM):
- 135
- Maximum Pressure (PSI):
- 120
- Outlet:
- 1-1/4" NPT
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 206
- Material:
- Cast Iron
- Ace Pumps EDP #:
- 49920
- Gasket Material:
- Viton
- Hydraulic Flow Rate:
- 7
- Inlet:
- 1-1/2" NPT
- Maximum Flow Rate (GPM):
- 135
- Maximum Pressure (PSI):
- 120
- Outlet:
- 1-1/4" NPT
- Power Type:
- Hydraulic
- Pump Engine:
- Ace 206
- a_mpn:
- FMC-150-HYD-206
