Flow Regulators are usually mounted behind cultivator shanks for the subsurface application of liquid fertilizers and soil fumigants. They are also used for above-ground streaming applications.
To determine the orifice plates you need, use the following equations:
Tabulated flow rates are for spraying water into air at atmospheric pressure. If your application creates backpressure, or if spraying into a liquid, measure and calibrate to ensure proper application rates.
W = Nozzle spacing (in inches) for broadcast spraying.
= Spray width (in inches) for single nozzle, band spraying, or boomless spraying.
= Row spacing (in inches) divided by the number of nozzles per row for directed spraying.
Note: Always insert orifice plate with side marked with number facing the outlet.
Note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C).
To determine the orifice plates you need, use the following equations:
Tabulated flow rates are for spraying water into air at atmospheric pressure. If your application creates backpressure, or if spraying into a liquid, measure and calibrate to ensure proper application rates.
W = Nozzle spacing (in inches) for broadcast spraying.
= Spray width (in inches) for single nozzle, band spraying, or boomless spraying.
= Row spacing (in inches) divided by the number of nozzles per row for directed spraying.
Note: Always insert orifice plate with side marked with number facing the outlet.
Product Documents
Application Rate Chart
TeeJet Regulator Application Rate Chart
Note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C).- Part #:
- CP4916
- Manufacturer:
- TeeJet
- Material:
- Stainless Steel
- Product Line:
- TeeJet
- Maximum Pressure (PSI):
- 60
- Minimum Pressure (PSI):
- 5
- Flow Rate (GPM):
- 4
- Material:
- Stainless Steel
- Product Line:
- TeeJet
- Maximum Pressure (PSI):
- 60
- Minimum Pressure (PSI):
- 5
- Flow Rate (GPM):
- 4
- a_mpn:
- CP4916
- Short Description:
