■ Provides excellent penetration and seed head coverage for fungicide spraying on cereal crops.
■ AI3070 produces two wide angle, flat spray patterns for uniform coverage in broadcast applications.
■ 30° forward tilted spray penetrates dense crop canopies, while the backward tilted 70° spray maximizes coverage of the crop seed head.
■ Drift resistant drops are produced through the use of a venturi air aspirator.
■ All acetal construction for excellent chemical and wear resistance.
■ Removable pre-orifice for fast and easy cleaning.
■ Suggested spray pressure range of 20-90 PSI (1.5-6 bar).
■ Automatic alignment with the use of 98579-1-NYR Quick TeeJet cap and gasket.
Note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C).
■ AI3070 produces two wide angle, flat spray patterns for uniform coverage in broadcast applications.
■ 30° forward tilted spray penetrates dense crop canopies, while the backward tilted 70° spray maximizes coverage of the crop seed head.
■ Drift resistant drops are produced through the use of a venturi air aspirator.
■ All acetal construction for excellent chemical and wear resistance.
■ Removable pre-orifice for fast and easy cleaning.
■ Suggested spray pressure range of 20-90 PSI (1.5-6 bar).
■ Automatic alignment with the use of 98579-1-NYR Quick TeeJet cap and gasket.
Product Documents
Application
■ Very Good for Post-Emergence Contact Herbicides
■ Very Good for Post-Emergence Systemic Herbicides
■ Excellent for Contact Fungicides
■ Very Good for Systemic Fungicides
■ Excellent for Contact Insecticides
■ Very Good for Systemic Insecticides
■ Excellent for Drift Management
■ Very Good for Post-Emergence Systemic Herbicides
■ Excellent for Contact Fungicides
■ Very Good for Systemic Fungicides
■ Excellent for Contact Insecticides
■ Very Good for Systemic Insecticides
■ Excellent for Drift Management
Application Rate Chart
AI3070 Application Rate Chart
Note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C).Drop Size Classification Chart
- Part #:
- AI3070-VP-C
- Manufacturer:
- TeeJet
- Material:
- Acetal Polymer with cap/gasket
- Product Line:
- AI3070
- Nozzle Degrees:
- 70
- Maximum Pressure (PSI):
- 90
- Minimum Pressure (PSI):
- 20
- Material:
- Acetal Polymer with cap/gasket
- Product Line:
- AI3070
- Nozzle Degrees:
- 70
- Maximum Pressure (PSI):
- 90
- Minimum Pressure (PSI):
- 20
- a_mpn:
- AI3070-VP-C
- Short Description:
