PTO Output: 1-3⁄8" female, 6-spline shaft
Instruction Manual
Part Breakdown
| Reference Number | Part Number | Description | Required |
| 1 | 2406-0007 | Drain Plug | 4 |
| 2 | 0150-9000C | Pump Casing (Model 9403C) | 1 |
| 2 | 0150-9000S1 | Pump Casing (Model 9403S) | 1 |
| 2 | 0150-9200C | Pump Casing (Model 9402C) | 1 |
| 2A | 3430-0480SP | Pump Casing (Model 9403C-SP) | 1 |
| 3 | 2253-0002 | Impeller Nut | 1 |
| 3 | 2253-0006 | Impeller Nut (Model 9403S) | 1 |
| 4 | 0401-9100P | Impeller (Nylon) (standard) | 1 |
| 4 | 0402-9100P | Impeller (Polypropylene) (9403S std.) | 1 |
| 5 | 1720-0083 | O-Ring | 1 |
| 6 | 2120-0008 | Mechanical Seal (optional Buna-N) | 1 |
| 6 | 2120-0009 | Mechanical Seal (standard Viton) | 1 |
| 6 | 3430-0589 | Mechanical Seal (opt. Silicon Carbide) | 1 |
| 8 | 1410-0056 | Slinger Ring | 1 |
| 9 | 0750-9200C3 | Mounting Flange | 1 |
| 9 | 0756-9200S | Mounting Flange (Model 9403S) | 1 |
| 10 | 6031-0252 | Nameplate (Specify Model Number) | 1 |
| 11 | 2210-0020 | Bolt | 4 |
| 11 | 2210-0125 | Bolt (Model 9403S) | 4 |
| 12 | 2000-0010 | Ball Bearing | 3 |
| 13 | 1610-0015 | Key | 1 |
| 14 | 0505-9200 | Pump Shaft | 1 |
| 15 | 1610-0004 | Key | 1 |
| 16 | 1820-0013 | Bearing Retainer | 1 |
| 17 | 1700-0100 | Gasket | 1 |
| 18 | 0703-9400D | Pedestal Bracket | 1 |
| 19 | 2001-0006 | Driver Shaft Bearings | 2 |
| 20 | 1810-0012 | Driver Shaft Bearing Retainer Ring | 1 |
| 21 | 1410-0094 | Bearing Spacer | 1 |
| 22 | 2840-0053 | End Cap (label) | 1 |
| 23 | 1820-0032 | Bearing Bore Retaining Ring | 1 |
| 24 | 3115-0031 | Driver Pulley (540 rpm) | 1 |
| 24 | 3115-0032 | Driver Pulley (1000 rpm) | 1 |
| 24 | 3115-0033 | Driver Pulley (1000 rpm, 1-3/4" shaft) | 1 |
| 25 | 1610-0033 | Key (Driver Pulley) | 1 |
| 25 | 1610-0034 | Key (Driver Pulley, 1-3/4" shaft) | 1 |
| 26 | 1810-0031 | Retaining Ring (Driver Pulley) | 1 |
| 26 | 1810-0032 | Retain. Ring (Dr. Pulley, 1-3/4" shaft) | 1 |
| 27 | 0555-9400F | Shaft (540 rpm) (3430-0207 kit used on 0555-9400F and 0556-9400F shafts) | 1 |
| 27 | 0556-9400F | Shaft (1000 rpm) (3430-0207 kit used on 0555-9400F and 0556- 9400F shafts) | 1 |
| 27 | 0557-9400F | Shaft (1-3/4" 1000 rpm) (3430-0190 kit used on 0557-9400F shaft) | 1 |
| 28 | 0555-9400F1 | Shaft (540 Quick Coupler) | 1 |
| 28A | 3250-0004 | Locking Ball | 3 |
| 28B | 1900-0115 | Collar Spring | 1 |
| 28C | 1400-0021 | Collar | 1 |
| 29 | 0503-9400 | Shaft (1" solid) | 1 |
| 30 | 3115-0034 | Driven Pulley (5/8" dia. bore) | 1 |
| 31 | 2230-0003 | Set Screw for Driven Pulley | 2 |
| 32 | 0706-9400C | Idler Bracket (Cast Iron Pumps) | 1 |
| 33 | 2405-0003 | Grease Zerk Fitting | 1 |
| 34 | 1810-0036 | Retaining Ring (Idler Bracket, Cast Iron) | 1 |
| 35 | 3115-0036 | Idler Pulley | 1 |
| 36 | 1410-0095 | Spacer (Idler Pulley) | 1 |
| 37 | 1820-0013 | Retaining Ring (Idler Pulley) | 1 |
| 38 | 1900-0156 | Torsion Spring (Idler for Cast Iron) | 1 |
| 39 | 2210-0111 | Idler Bolt/Shaft | 1 |
| 40 | 2840-0075 | Belt Shield | 1 |
| 41 | 2840-0076 | Belt Shield | 1 |
| 42 | 1520-0062 | Bracket for Belt Shield | 1 |
| 43 | 2210-0021 | Attachment Bolt for Shield | 1 |
| 44 | 2240-0017 | Assembly Bolts for Shield | 4 |
| 45 | 2252-0002 | Assembly Nuts for Shield | 4 |
| 46 | 3100-0006 | Poly V-Belt (540 rpm) | 1 |
| 46 | 3100-0005 | Poly V-Belt (1000 rpm) | 1 |
| 47 | 2210-0055 | Bolts for Pump to Bracket | 2 |
| 48 | 2260-0006 | Lock Washers for Bracket Bolts | 2 |
| 49 | 1600-0070 | Roll Pin | 2 |
- Part #:
- 9402C-540
- Manufacturer:
- Hypro
- Material:
- Cast Iron
- Gasket Material:
- Viton
- Inlet:
- 1-1/4" NPT
- Maximum Flow Rate (GPM):
- 76
- Maximum Pressure (PSI):
- 95
- Maximum RPM:
- 600
- Maximum Temperature (F°):
- 140
- Outlet:
- 1" NPT
- Power Type:
- Belt Driven
- Pump Series:
- 9400 Belt Drive
- Material:
- Cast Iron
- Gasket Material:
- Viton
- Inlet:
- 1-1/4" NPT
- Maximum Flow Rate (GPM):
- 76
- Maximum Pressure (PSI):
- 95
- Maximum RPM:
- 600
- Maximum Temperature (F°):
- 140
- Outlet:
- 1" NPT
- Power Type:
- Belt Driven
- Pump Series:
- 9400 Belt Drive
- a_mpn:
- 9402C-540
